Starter pack of faux stained glass suncatcher templates and panels allowing you to create 3 separate, beautiful suncatcher pieces using 3 different methods. A real introduction to transparent resin art. Includes all the templates, panels and film you need to make the 3 artworks, with a clear, short list of what else you will need to get started.
Contents
One Rose Window MDF template and holographic film
One stained glass template and one 12 x 12" acylic panel to make it on
One preattached suncatcher template
Note : bundle cost represents an approx 10% saving over the cost of the individual items.
Not supplied (get these from Amazon)
Resin - we recomend you buy 1 Gallon of Nic Pro 2 part epoxy to start
Transparent Dyes. - we recomend you buy DecorRom 18 color pack of UV resin dyes
PPE, cups, stirring sticks etc. (You may get most of what you need with your Nic Pro Resin)
Note that the resin and dyes listed here will enable you to make around 20 templates, meaning you will have plenty left for other projects.
Instructions - The embedded videos for the three pieces are intended to be the instruction for use for this bundle. The 12x12 panels should be used for the square stained glass template - There will be a small border around the outside edge which is intentional. We recomend you prep the templates as follows
Paint the Rose Window black or whatever color you like. Dry.
Mix about 1/2oz to 3/4 oz of resin and spread it over the 12x12 panel amking sure it is fully coated.
Dip the rose window temlplate into the resin on the panel, check it is fully coated and then place it onto the window film. Weigh down and leave to cure.
Place the stained glass template onto the remaining wet resin on the panel, give it a wiggle to bed it in and leave to cure.
Color your templates following the embedded videos.
