One time use Hot air balloons Resin Art Template for use in either resin art, or alternatively, with acrylic pour painting.
This 3D printed part sits flat against the canvas or panel allowing the artist to stick it in place using a thin coat of resin. The artist can then pour paint or resin into the different areas creating a beautiful personalized Scene of Hot air balloons over water.
This pattern is very versatile but was originally intended to be used for resin art on a transparent acrylic (plexiglass) panel and placed in or near a window.
It is intended that the pattern remain a permanent part of the finished piece combining your favorite method with the crisp lines of the 3D printed part.
The pattern is just under 12 inches in diameter (although not a perfect circle as you can see from the photos below) and 1/16" thick giving plenty of depth for your pour. Please note sizes are approximate as there is some shrinkage when the part is removed from the printer. It is produced from metallic copper PLA.
We try to make the template as robust as possible by using high quality PLA material and through careful design. However, please note that it has to be a thin walled part to leave space for you to add color and therefore may be damaged if not handled carefully.
Please Note - Price is for the 3D printed parts only. Canvases, boards, resin and paint etc not supplied
For an example of the patterns being used please watch the embedded video or visit our YouTube Channel at https://www.youtube.com/@PourAwayFluidArts/videos.