Autumn Leaves Template Kit.

Make your own version of our Autumn Leaves mixed media artwork with this easy to use kit. 

The recommended method for this piece is as follows - 

1. Create a background on a 10 x 20 inch canvas in either resin or acrylic and let dry.

2. Stick the 3D printed parts in place using a layer of Epoxy resin.

3. You can create your own arrangement of the branch or leaves or you can copy the arrangement in the example pictures below.  

4. Once cured, use acrylic paint to ripple pour into the leaves.  You can create an autumnal piece or mix things up a little by making the leaves green.

Note that the parts supplied in this Kit are 3D printed and as such are flat.  This is a departure from the example video below that uses a 3D bent copper wire for the branch.  You can of course use your own copper wire in place of the supplied branch parts.

Note also- you don't need to use all the supplied branch parts and you can adjust the length of the leaf stalks etc. to form the design that works for you.

It is intended that the pattern remain a permanent part of the finished piece.  The pattern can also be permanently fixed to a aluminum composite panel, a mirror or other substrate as the artist decides.

We try to make the pattern as robust as possible by using high quality PLA material and through careful design.  However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully. 

Please Note - Price is for pattern only (7 Leaves and Multiple branch parts) - Resin, canvas etc is not supplied. 

For an example of the pattern being used please watch the embedded video.