This bundle is made up of 3 (three) reusable guide patterns designed specifically for use in acrylic pouring art. Save yourself the time of adding them to your cart one by one, and save yourself some cash in the process!
Contents are one of each of the following -
1. Spiral Reusable Guide Pattern (8x8 inches)
2. Waves Reusable Guide Pattern (8x8 inches)
3. Quarter Rings Reusable Guide Pattern (8x8 inches)
These 3D printed parts sit flat against the canvas allowing the artist to pour in between the "wires" creating intricate patterns. It allows the piece to combine the randomness of a ripple pour with the crisp lines and symmetry of the 3D printed part.
Note - the edge and cross supports should be on the top side during the pour so that the paint is free to flow underneath them.
When the pour is complete the artist can lift the guide carefully out of the paint, gently rinse it in cold water and leave to dry for reuse.
The guides are all 8 inches square and 3/16" deep or more giving plenty of space for your pour. Please note sizes are approximate as there is some shrinkage when the part is removed from the printer.
We try to make the guide as robust as possible by using high quality PLA material and through careful design. However please note that it has to be a thin walled part so as to not leave gaps in your painting and therefore may be damaged if not handled carefully.
Please note - price is for 3D printed reusable guides only. Canvases, boards resin and paint etc not supplied
For an example of the guides being used please watch the embedded video against each individual product in the store.
The "compare at" price is the cost of purchasing the individual items at full price.