Paint runs Pattern

One time use Paint runs Pattern for use in resin art or acrylic pouring. 

This 3D printed part sits flat against the canvas or panel allowing the artist to stick it in place using a thin coat of resin.   The artist can then pour colored resin or paint into the different areas creating beautiful personalized intricate dribbling paint effect artwork.  

It is intended that the pattern remain a permanent part of the finished piece combining your favorite method with the crisp lines and symmetry of the 3D printed part.

The pattern is approx. 12 inches square and 1/16" thick giving plenty of depth for your pour.  Please note sizes are approximate as there is some shrinkage when the part is removed from the printer.   It is produced from metallic copper PLA.  

We try to make the pattern as robust as possible by using high quality PLA material and through careful design.  However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully. 

Please Note - Price is for the 3D printed part only.  Frames, acrylic panels, resin and paint etc not supplied

For an example of the pattern being used please watch the embedded video.