Flower Suncatcher pre-attached Template

Flower suncatcher template with acrylic backing.  

This 3D printed part is supplied already attached to an acrylic panel  The artist can pour colored resin, or a range of other coloring media, into the different areas creating a beautiful personalized sun catcher. Because you don't need to use resin to stick the template in place this product is perfect for non resin artist and for those who like paint by numbers.

There is a hanging loop to allow the finished piece to be hung on a string or ribbon, somewhere to catch the light.

The template cannot be removed from the panel without destroying both the panel and the 3d printed parts.  However care should still be taken as full strength will only be achieved once the template is colored and cured.  Note that due to manufacturing processes our pre-attached templates don't come with any protective film layer. 

The template is approx. 8 inches (200mm) diameter and 1/16" (2mm) thick giving plenty of depth for your pour.  The hanging loop projects a further inch.  The template is produced from metallic copper colored PLA on fully transparent acrylic.  

We try to make the template as robust as possible by using high quality PLA material and through careful design.  However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully. 

For an example of use please watch the embedded video.