Spiral Blocks Pattern

One time use Spiral Blocks Pattern for use in resin art. 

This 3D printed part sits flat against a glass sheet or transparent acrylic panel allowing the artist to stick it in place using a thin coat of resin.   The artist can then pour colored resin into the different areas creating beautiful personalized intricate stained glass effect artwork.  

It is intended that the pattern remain a permanent part of the finished piece combining your favorite method with the crisp lines and symmetry of the 3D printed part. The pattern is designed to be approx. 11.25 inches square so that it will fit into a 12 inch square frame. It will also fin on a 12 inch square panel  with a small clearance around the outside edge.

The pattern is approx. 11.25 inches square and 1/16" thick giving plenty of depth for your pour.  Please note sizes are approximate as there is some shrinkage when the part is removed from the printer.   It is produced from metallic copper PLA.  

We try to make the pattern as robust as possible by using high quality PLA material and through careful design.  However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully. 

Please Note - Price is for the 3D printed parts only.  Canvases, boards, resin and paint etc not supplied

For an example of the patterns being used please watch the embedded video or visit our YouTube Channel at https://www.youtube.com/@PourAwayFluidArts/videos.