One time use Circles pattern for use in either resin art or acrylic pour painting.
These 3D printed parts sit flat against the canvas or panel allowing the artist to stick them in place using a thin coat of resin . The artist can then pour paint or resin into the different sized circles creating bold personalized color patterns in a background of their choosing. The circles are supplied with a 12x12 inch square to give a solid edge to the piece. The artist may choose to use this part or not depending on their final design intent.
In total there are over 50 separate circles in this pack. You don't need to use them all or alternatively you can purchase more than one set for a larger piece.
It is intended that the circles (and square) remain a permanent part of the finished piece combining your favorite method with the crisp lines and symmetry of the 3D printed parts.
The pattern is 12 inches square and 1/16" thick giving plenty of depth for your pour. Please note sizes are approximate as there is some shrinkage when the part is removed from the printer. It is produced from metallic copper PLA.
We try to make the guide as robust as possible by using high quality PLA material and through careful design. However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully.
Please Note - Price is for the 3D printed parts only. Canvases, boards, resin and paint etc not supplied
For an example of the patterns being used please watch the embedded video or visit our YouTube Channel at https://www.youtube.com/@PourAwayFluidArts/videos.