Woven Circles 12 x 12 Pattern

One time use Woven Circles pattern for use in either resin art or acrylic pour painting. 

This 3D printed part sits flat against the canvas or other substrate allowing the artist to stick it in place using either a thin coat of resin (recommended) or a layer of paint.   The artist can then pour paint or resin into the different areas creating beautiful personalized intricate geometric patterns. 

It is intended that the pattern remain a permanent part of the finished piece combining your favorite method with the crisp lines and symmetry of the 3D printed part. 

The pattern is 12 inches square and 1/16" thick giving plenty of depth for your pour.  Please note sizes are approximate as there is some shrinkage when the part is removed from the printer.   It is produced from metallic copper PLA+.  

We try to make the pattern as robust as possible by using high quality PLA+ material and through careful design.  However, please note that it has to be a thin walled part to leave some space for you to add color and therefore may be damaged if not handled carefully. 

Note - This part, due to the pattern design, is quite flexible and does require care when sticking to the canvas or substrate to ensure that the spacing is correct for pouring.

Please Note - Price is for the 3D printed parts only.  Canvases, boards, resin and paint etc not supplied

For an example of the patterns being used please watch the embedded video or visit our YouTube Channel at https://www.youtube.com/@PourAwayFluidArts/videos.